Main Menu


Welcome Guest

Welcome, Guest. Please login or register.

Login with username, password and session length

Search

Author Topic: 170 S indicator arms  (Read 257 times)

0 Members and 1 Guest are viewing this topic.

Offline WernerJ

  • (0)
  • subscriber
  • *
  • Posts: 4
  • Location: South Africa; Gauteng
  • Year_Model: 1953_170Sb
170 S indicator arms
« on: February 28, 2021, 01:32:46 PM »
The right sided indicator does not go up and light up anymore. How do I go about fixing them? Please help!

Regards,

Werner

Offline Scott Montoney

  • Administrator
  • (0)
  • member
  • *
  • Posts: 661
  • 1952 - 220 Cab B
  • Exterior Color: Black
  • Interior color: Red
  • Location: Mason,Ohio USA
  • VIN #: 187.013.04370/52
  • Year_Model: '52 220 Cab B
Re: 170 S indicator arms
« Reply #1 on: February 28, 2021, 07:16:25 PM »
I don't have those side turn indicators, buy some general electrical troubleshooting would apply.
I assume there is a way to remove it.  I would use a Volt Meter to first verify that there is voltage (or a ground signal) being applied across the component when it should be activated.  That way you can determine if the fault is in the device, or in the wiring going to the device.
"Gertrude" a.k.a. "Troidl"
1952 - 220 Cabriolet B

Offline mb170sb

  • (0)
  • subscriber
  • *
  • Posts: 13
  • Location: Norway
  • Year_Model: 1940 230 Bcab, 1952 220Acab, 1967 250SL,
Re: 170 S indicator arms
« Reply #2 on: April 14, 2021, 11:47:18 AM »
I have available, but it is in Norway.